RMCS Logo Orange banner

About Our Formwork Ferrule Cones

Rebar, Mesh and Construction Supplies (Pty) Ltd supplies a wide range of Formwork accessories such as ferrule tubing and ferrule cones to the construction and related industries. Formwork ferrule tubing is used to space shutters and to recover expensive formwork shutter tie-rods. The inside diameter of the Ferrule tubing needs to be at leat 1mm greater than that of the tie-rod being used to fix the formwork shutter. Ferrule tubing cones are inserted at each end to seal off the hole in the shutter. Ferrule Tube Cones fit on the inside of the Ferrule Tube. It can be removed after the shutters have been dismantled and be used again. Made from recycled polypropylene.

Ferrule Tubing



















Product codes and sizes:
Product Code
Tube Inside Diameter (mm)
Tube Outside Diameter (mm)
Packaging Quantity
EC-1-20
17
20
2000
EC-1-25
22
25
2000
EC-1-30
26
30
1000
EC30-22-25
22
25
1000

The EC30-22-25 Ferrule Cone has a 30mm head.

About Our Formwork Ferrule Tubing

Formwork ferrule tubing is used to space shutters and to recover expensive formwork shutter tie-rods. The inside diameter of the Ferrule tubing needs to be at leat 1mm greater than that of the tie-rod being used to fix the formwork shutter. Ferrule tubing end cones are inserted at each end to seal off the hole in the shutter. Gettule Tuning is made from durable ABS plastic.

Ferrule Tubing

























Product codes and sizes:
Product Code
Inside Diameter (mm)
Outside Diameter (mm)
Meter Lengths
C-1-20
17
20
3
C-1-25
22
25
3
C-1-30
26
30
3


email RMCS Now

Featured Products

Rebar Spacers Rebar Spacers

RMCS Fixing Pliers / Concretors Nippers Fixing Pliers / Concretors Nippers

Black Annealed Binding Wire Black Annealed Binding Wire

Orange and Yellow Barrier Netting Orange & Yellow Barrier Netting

Scaffolding Couplers Scaffolding Couplers

DBR-32WH Handheld Rebar Bender & Straightener Handheld Rebar Straightener Bender

DBC-16H Portable Rebar Cutter Bender Handheld Rebar Cutter Bender

DFC20A Flush Cutting Rebar Saw Flush Cutting Saw

DC-20W handheld rebar cutter Handheld Rebar Cutter

Contact us now on +27 11 310 8660 or +27 11 310 7113. You can also email us on [email protected]